After the China 6300 Series Bearing products is cleaned, carefully observe that there will always be some residual oil in the inner and outer ring raceways, on the rolling elements, and in the gaps of the cage. When inspecting the China 6300 Series Bearing, use a clean ruler and other tools to scrape out the remaining oil, apply it to the thumb, and use the index finger to slowly rub the grease back and forth. Need to wash again.Finally, hold the bearing in your hand, pinch the inner ring, and turn the outer ring to rotate horizontally (a large China 6300 Series Bearing products can be placed on the assembly table. Put a cushion on the inner ring, suspend the outer ring of the bearing, and then press the China 6300 Series Bearing tightly The inner ring of the bearing is rotated and the outer ring is rotated), and the rotation of the bearing is flexible, without block, and without jumping.
After adding lubricant to the cleaned China 6300 Series Bearing products, they should be placed on the assembly table, with a clean cloth or paper pad underneath, and a plastic sheet on the top for assembly. It is best not to place the China 6300 Series Bearing directly on the ground or on the box.