What are the four major factors that must be paid attention to in the selection of China 6800 Series Bearing products
There are four main factors that must be considered in the selection of China 6800 Series Bearing products, namely limit speed, operating environment, operating temperature, and predetermined workload. You can choose suitable bearings according to these performance requirements.
The cleaning of Cheap 6800 Series Bearing can be divided into two parts: rough cleaning and fine cleaning, and a metal mesh frame can be placed at the bottom of the container used. When rough cleaning, first use a brush or other tool in the oil to remove the grease or adhesion on the Cheap 6800 Series Bearing china. At this time, if the bearing is rotated in oil, be careful that the rolling surface may be damaged by foreign matter or the like. For fine cleaning, slowly turn the bearing in oil, note that this step needs to be done carefully.
The main measures to avoid cracks in the quality 6800 Series Bearing are to control the defects of raw materials such as non-metallic inclusions, surface slag inclusions, folding, microscopic pores, shrinkage holes, and air bubbles in manufacturing. Control the processing strength of the quality 6800 Series Bearing, such as internal stress (thermal stress and tissue stress), grinding stress, stamping stress, etc. generated during heat treatment and quenching. During the use and installation of the quality 6800 Series Bearing, care should be taken not to knock maliciously, install according to regulations, ensure lubrication, enhance the sealing effect, control the inflow of external impurities and avoid contact with corrosive substances.
In order to give full play to the Best 6800 Series Bearing in china and maintain its proper performance for a long time, regular maintenance must be done. Through proper periodic inspection of Best 6800 Series Bearing, it is important to detect failures early and prevent accidents before they occur, which is very important to increase productivity and the economy.
A linear bearing relates to the technical field of bearings; it includes a casing, a bracket located in the casing, a plurality of positioning holes located on the bracket, balls located in the positioning holes, and a flange located at one end of the casing facing the inner side of the casing for supporting one end of the bracket.
The joint bearing comprises an inner ring, an outer ring and a connecting rod connected with the outer ring, a connecting pipe for connecting with the connecting rod is integrally formed on the outer ring, and the connecting rod is composed of several hollow rods.
Usually used for light and medium-load bearings with peripheral speeds less than 4-5m/s, with an almost constant supply of lubricant injected from the container through holes, needles, valves, etc.
On a sunny day, use a screwdriver to lift up the oil at a 45-degree angle to the horizontal. Observe the oil droplets against the sunlight. In the light, you can clearly see that there is no wear debris in the lubricating oil, which is good and can continue to function. If the wear debris is too much, the lubricating oil should be replaced.
Different types of rolling bearings have different characteristics and are suitable for different use conditions of various machines. When selecting a bearing, the following factors are usually considered.
Bearing storage environment: cool, dry and avoid direct sunlight. When choosing a storage location, it is important to avoid bearing dirt and rust. In places where the temperature changes frequently, water droplets will collect on the bearing, which will cause the bearing to rust and become unusable.
Bearings are an important component in contemporary machinery and equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during its movement, and ensure its rotation accuracy.
Even tiny dust invisible to the naked eye enters the bearing, which will increase bearing wear, vibration and noise. Bearings and their surrounding accessories should be kept clean, especially dust and dirt, tools and working environment should also be kept clean.
Online customer service
Customer service hotline :