PO Inner Ring Tolerance

 

Tolerance in um

 d 毫米(mm)  △Dmp  Vdp2)  Vdmp  Kia  △bs  Vbs
 Diameter series
 9  0,1  2,3,4
 Over  Include  High  Low  Max  Max  Max  High  Low  Max
0.6" 2.5 0 -8 10 8 6 6 10 0 -40 12
2.5 10 0 -8 10 8 6 6 10 0 -120 15
10 18 0 -8 10 8 6 6 10 0 -120 20
18 30 0 -10 13 10 8 8 13 0 -120 20
30 50 0 -12 15 12 9 9 15 0 -120 20
50 80 0 -15 19 19 11 11 20 0 -150 25
80 120 0 -20 25 25 15 15 25 0 -200 25

Note:

1) Including 0.6

2) No rated value for diameter series 7,8

 

  PO Outer Ring Tolerance

 

Tolerance in um

 d(mm)  △dmp  Vdp2)  Vdmp  Kia  △bs  Vbs
 Diameter series
 9  0,1  2,3,4  2,3,4
 Over Include  High  Low  Max  Max  Max  High  Low  Max
2.51'' 6 0 -8 10 8 6 10 6 15 same as the one bearing's inner ring ABS and ABS
6 18 0 -8 10 8 6 10 6 15
18 30 0 -9 12 9 7 12 7 15
30 50 0 -11 14 11 8 16 8 20
50 80 0 -13 16 13 10 20 10 25
80 120 0 -15 19 19 11 26 11 35
120 150 0 -18 23 23 14 30 14 40
150 180 0 -25 31 31 19 38 19 45
180 250 0 -30 38 38 23 - 23 50

Note:

1 )lncluding 2.5

2)No rate value for diameter series 7.8

3) No rate value for diameter series 9,0,1

 

  P6 Inner Ring Tolerance

 

Tolerance in um

 d 毫米(mm)  △Dmp  Vdp2)  Vdmp  Kia  △bs  Vbs
 Diameter series
 9  0,1  2,3,4
 Over  Include  High  Low  Max  Max  Max  High  Low  Max
0.6" 2.5 0 -7 9 7 5 5 10 0 -40 12
2.5 10 0 -7 9 7 5 5 6 0 -120 15
10 18 0 -7 9 7 5 5 7 0 -120 20
18 30 0 -8 10 8 6 6 8 0 -120 20
30 50 0 -10 13 10 8 8 10 0 -120 20
50 80 0 -12 15 15 9 9 10 0 -150 25
80 120 0 -15 19 19 11 11 13 0 -200 25

Note:

1) Including 0.6

2) No rate value for diameter series 7,8

 

  P6 Inner Ring Tolerance

 

Tolerance in um

 d(mm)  △dmp  Vdp2)  Vdmp  Kia  △bs  Vbs
 Diameter series
 9  0,1  2,3,4  0,2,3,4
 Over  Include  High  Low  Max  Max  Max  High  Low  Max
2.5'' 6 0 -7 9 7 7 9 5 8 same as the one bearing's inner ring ABS and ABS
6 18 0 -7 9 7 7 9 5 8
18 30 0 -8 10 8 8 10 6 9
30 50 0 -9 11 9 9 13 7 10
50 80 0 -11 14 11 11 16 8 13
80 120 0 -13 16 16 16 20 10 18
120 150 0 -15 19 19 19 25 11 20
150 180 0 -18 23 23 23 30 14 23
180 250 0 -20 25 25 25 - 15 25

Note:

1) Including 2.5

2) No rate value for diameter series 7,8

3)No rate value for diameter series 9

 

  P5 Inner Ring Tolerance

 

Tolerance in um

 d 毫米(mm)  △Dmp  Vdp2)  Vdmp  Kia  Sd  Sia3)  △bs  Vbs
 Diameter series
 9  0,1,2,3,4
 Over  Include  High  Low  Max  Max  Max  Max  Max  High  Low  Max
0.6" 2.5 0 -5 5 4 3 4 7 7 0 -40 5
2.5 10 0 -5 5 4 3 4 7 7 0 -40 5
10 18 0 -5 5 4 3 4 7 7 0 -80 5
18 30 0 -6 6 5 3 4 8 8 0 -120 5
30 50 0 -8 8 6 4 5 8 8 0 -120 5
50 80 0 -9 9 7 5 5 8 8 0 -150 6
80 120 0 -10 10 8 5 6 9 9 0 -200 6

Note:

1) Including 0.6

2) No rate value for diameter series 7,8

3)Fit for groove ball bearing only.

 

  P5 Inner Ring Tolerance

 

Tolerance in um

 d(mm)  △dmp  Vdp2)  Vdmp  Kia  SD4)  Sea4)5)  △bs  Vbs
 Diameter series
 9  0,1,2,3,4
 Over  Include  High  Low  Max  Max  Max  Max  Max  High  Low  Max
2.5'' 6 0 -5 5 4 3 5 8 8 same as the one bearing's inner ring ABS and ABS 5
6 18 0 -5 5 4 3 5 8 8 5
18 30 0 -6 6 5 3 6 8 8 5
30 50 0 -7 7 5 4 7 8 8 5
50 80 0 -9 9 7 5 8 8 10 6
80 120 0 -10 10 8 5 10 9 11 8
120 150 0 -11 11 8 6 11 10 13 8
150 180 0 -13 13 10 7 13 10 14 8
180 250 0 -15 15 11 8 15 11 15 10

Note:

1) Including 2.5

2) No rate value for diameter series 7,8

3)No values for shielded and sealed bearings.

4)No values for flanged bearings.

5)Fit for groove ball bearings.