Bearing precautions

Update:26-09-2017

   Compared with the general mechanical parts, rolling bearings of high precision, so the use of the corresponding should be careful.
   1) Keep the bearing and its surroundings clean
   2) carefully used when used
   If used careless to the bearing with a strong impact, the bearing will appear scars, indentation, fracture and other injuries.
   3) Use the appropriate tool
   4) Note that the bearing rust
   Avoid use in damp places, and wear gloves without sweating.
   5) The user should be familiar with the bearing
   6) to develop the bearing use of the operating specifications
A, bearing the custody
B, bearing and its surrounding cleaning
C, the size of the installation site and the quality of processing inspection
D, install the job
E, after installation check
F, demolition operations
G, maintenance (regular inspection)
H, lubricant supplement
   Bearing the custody
   Bearing at the factory are coated with the right amount of anti-rust oil and anti-rust paper packaging, as long as the packaging is not destroyed, the quality of the bearing will be guaranteed. But long-term storage, to be less than 65% humidity, the temperature of 20 degrees Celsius under the conditions, stored in the ground 30cm above the shelf is appropriate. In addition, the storage place should avoid direct sunlight or touch with the cold walls.

http://www.chinabearing.net/