Write down what you want and enjoy it. Reconfirm and get the result.
X
Sure
language
中国
韩国
韩国
韩国
韩国
韩国

News center

-
News
2022-09-16
The cleaning of Cheap 6800 Series Bearing can be divided into two parts: rough cleaning and fine cleaning, and a metal mesh frame can be placed at the bottom of the container used. When rough cleaning, first use a brush or other tool in the oil to remove the grease or adhesion on the Cheap 6800 Series Bearing china. At this time, if the bearing is rotated in oil, be careful that the rolling surface may be damaged by foreign matter or the like. For fine cleaning, slowly turn the bearing in oil, note that this step needs to be done carefully.
See more information 白箭头 黑箭头
2022-09-02
In order to give full play to the Best 6800 Series Bearing in china and maintain its proper performance for a long time, regular maintenance must be done. Through proper periodic inspection of Best 6800 Series Bearing, it is important to detect failures early and prevent accidents before they occur, which is very important to increase productivity and the economy.
See more information 白箭头 黑箭头
2022-09-09
The main measures to avoid cracks in the quality 6800 Series Bearing are to control the defects of raw materials such as non-metallic inclusions, surface slag inclusions, folding, microscopic pores, shrinkage holes, and air bubbles in manufacturing. Control the processing strength of the quality 6800 Series Bearing, such as internal stress (thermal stress and tissue stress), grinding stress, stamping stress, etc. generated during heat treatment and quenching. During the use and installation of the quality 6800 Series Bearing, care should be taken not to knock maliciously, install according to regulations, ensure lubrication, enhance the sealing effect, control the inflow of external impurities and avoid contact with corrosive substances.
See more information 白箭头 黑箭头
2022-08-24
A linear bearing relates to the technical field of bearings; it includes a casing, a bracket located in the casing, a plurality of positioning holes located on the bracket, balls located in the positioning holes, and a flange located at one end of the casing facing the inner side of the casing for supporting one end of the bracket.
See more information 白箭头 黑箭头
2022-08-17
The joint bearing comprises an inner ring, an outer ring and a connecting rod connected with the outer ring, a connecting pipe for connecting with the connecting rod is integrally formed on the outer ring, and the connecting rod is composed of several hollow rods.
See more information 白箭头 黑箭头
2022-08-10
Usually used for light and medium-load bearings with peripheral speeds less than 4-5m/s, with an almost constant supply of lubricant injected from the container through holes, needles, valves, etc.
See more information 白箭头 黑箭头
2022-08-03
On a sunny day, use a screwdriver to lift up the oil at a 45-degree angle to the horizontal. Observe the oil droplets against the sunlight. In the light, you can clearly see that there is no wear debris in the lubricating oil, which is good and can continue to function. If the wear debris is too much, the lubricating oil should be replaced.
See more information 白箭头 黑箭头
2022-07-27
Different types of rolling bearings have different characteristics and are suitable for different use conditions of various machines. When selecting a bearing, the following factors are usually considered.
See more information 白箭头 黑箭头
2022-07-20
Bearing storage environment: cool, dry and avoid direct sunlight. When choosing a storage location, it is important to avoid bearing dirt and rust. In places where the temperature changes frequently, water droplets will collect on the bearing, which will cause the bearing to rust and become unusable.
See more information 白箭头 黑箭头
2022-07-13
Bearings are an important component in contemporary machinery and equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during its movement, and ensure its rotation accuracy.
See more information 白箭头 黑箭头
2022-07-06
Even tiny dust invisible to the naked eye enters the bearing, which will increase bearing wear, vibration and noise. Bearings and their surrounding accessories should be kept clean, especially dust and dirt, tools and working environment should also be kept clean.
See more information 白箭头 黑箭头
2022-06-29
When removing the bearing for inspection, first make a record of the appearance by means of photography and other methods. Also, confirm the amount of remaining lubricant and sample the lubricant before cleaning the bearing.
See more information 白箭头 黑箭头
Online customer service
-

Customer service hotline :

+86-574-58964255