After the Best 6200 Series Bearing is installed, the inspection must be carried out, and the installation position of the bearings must be inspected first. Mainly check whether the running parts collide with the fixed parts, whether the lubricating oil can flow into the Best 6200 Series Bearing smoothly, and whether the sealing device and the axial fastening device are installed correctly.

Secondly, check the radial bearing clearance of the Best 6200 Series Bearing. In addition to installing bearings with pre-interference, the radial clearance of the bearings should be checked. The Best 6200 Series Bearing can be inspected by hand rotation. It is better to be stable and flexible, without vibration and without swinging from side to side.
The radial clearance of the bearing, some unqualified after installation, can be adjusted. Some have been adjusted according to the standard regulations during manufacture, and cannot be adjusted if they are unqualified after installation, such as Best 6200 Series Bearing, deep groove ball bearings, self-aligning ball bearings, cylindrical roller bearings, etc. If this type of bearing fails to pass the inspection after installation, and the radial assembly clearance of the bearing is too small, it means that the fit selection of the Best 6200 Series Bearing is improper, or the assembly part is processed incorrectly. At this time, the bearing must be removed, the cause must be found out, and then reinstalled after being eliminated. Of course, the bearing clearance is too large.